FFP3 Mask
  • Air ProFFP3 Mask
  • Air ProFFP3 Mask
  • Air ProFFP3 Mask
  • Air ProFFP3 Mask
  • Air ProFFP3 Mask

FFP3 Mask

FFP3 masks refer to masks that meet European (CEEN1409: 2001) standards. There are three levels of European protective mask standards: FFP1 masks, FFP2 masks, and FFP3 masks. It is different from the American standard in that it uses a detection flow rate of 95 L / min and uses DOP oil to dust.

Send Inquiry

Product Description

FFP3 masks refer to masks that meet European (CEEN1409: 2001) standards. There are three levels of European protective mask standards: FFP1 masks, FFP2 masks, and FFP3 masks. It is different from the American standard in that it uses a detection flow rate of 95 L / min and uses DOP oil to dust.

FFP3 mask standard level: FFP1, FFP2, FFP3
FFP3 mask detection flow: 95L / min
FFP3 mask types: half, full face mask and disposable anti-particle mask
FFP3 mask use: prevent or reduce dust from entering the human respiratory organs
FFP3 mask protection objects: KP and KN



FFP3 category mask detection instrument


The FFP3 category of masks, both European and American standards, are specified for testing with the American TSI-8130 Automated Filter Testers. The American standard uses the NaCl method for class N, the DOP method for class R, and the DOP method for European standards.


TSI-8130 instrument uses the NaCl method: the instrument can automatically generate salt particles, the average particle diameter is 0.2 μm (aggregated average diameter 0.26 μm, arithmetic average diameter 0.07 μm), the sample is set at a certain flow rate, the instrument automatically prints Flow, resistance, transmittance.
The DOP method uses DOP oil for dusting. The diameter of the DOP oil particles is 0.33 μm, and the average diameter is 0.20 μm.

FFP3 category mask use


1. Personal protective equipment whose purpose is to prevent or reduce dust in the air from entering the human respiratory organs to protect life;


2. Material: Most of the anti-particulate masks are made of two layers of non-woven fabric inside and outside, and a filter cloth (melt-blown cloth) in the middle layer;


3. Filtering principle: The filtering dust mainly depends on the middle filter cloth. Because the melt-blown cloth has the characteristics of static electricity, it can adsorb positive particles. Since the fine dust is adsorbed on the original filter, and the original filter is electrostatically charged and cannot be washed, the self-priming filter type anti-particulate respirator needs to replace the original filter regularly.


4. Remarks: The requirements for the use of anti-particulate masks are quite strict internationally. Anti-particulate masks belong to the first class in personal protective equipment, higher than earmuffs and protective glasses. The more authoritative testing certifications are European CE certification and American NIOSH certification, while Chinese standards are similar to American NIOSH


5. Protection object: The protection object is divided into KP and KN. The so-called KP can protect oily and non-oily particles, and KN can only protect non-oily particles.


6, protection level: China's protection level is divided into KP100, KP95, KP90 and KN100, KN95, KN90. Among them, KP100 and KN100 have the highest filtration efficiency, and the national standard requires greater than 99.97%, so it is also the safest for use.



FFP3 category mask filter material


Different FFP3 masks use different filter materials. The filtering effect is related to the particle size of the particles, and it is also affected by whether the particles contain oil. FFP3 masks are usually classified according to filtration efficiency and classified as suitable for filtering oily particles. Oil-free particles such as dust, water-based mist, paint mist, oil-free smoke (welding smoke), microorganisms, etc. Although "non-oily particulate" filter materials are more common, they are not suitable for oily particulates, such as oil mist, soot, asphalt smoke, coke oven smoke, and so on. The filter material suitable for oily particles can also be used for non-oily particles.


Choice of FFP3 category masks


First: The dust blocking efficiency of the mask must be high. The dust blocking efficiency of a mask is based on its dust blocking efficiency against fine dust, especially respiratory dust below 5 μm. In general gauze masks, the principle of dust blocking is mechanical filtering, that is, when the dust hits the gauze, it will block some large particles of dust in the gauze after layer by layer of blocking. However, fine dust, especially dust smaller than 5 μm, passes through the mesh of gauze and enters the respiratory system. There are some anti-particulate masks on the market for sale.The filter material is composed of permanent static charged fibers. Respirable dust smaller than 5 μm will be attracted by static electricity and adsorbed on the filter material when passing through this filter material. It really plays a role in blocking dust.


Second: The degree of closeness between the mask and face shape is better. When the mask is not close to the face, dust in the air will enter the respiratory tract through the gaps around the mask. Therefore, people should choose an anti-particle mask suitable for their face shape and wear an anti-particle mask properly.


Third: Wear comfortably, including small breathing resistance, light weight, hygienic wear and convenient maintenance, such as wearing arched anti-particle masks.


Choice of FFP3 category masks


First: The dust blocking efficiency of the mask must be high. The dust blocking efficiency of a mask is based on its dust blocking efficiency against fine dust, especially respiratory dust below 5 μm. In general gauze masks, the principle of dust blocking is mechanical filtering, that is, when the dust hits the gauze, it will block some large particles of dust in the gauze after layer by layer of blocking. However, fine dust, especially dust smaller than 5 μm, passes through the mesh of gauze and enters the respiratory system. There are some anti-particulate masks on the market for sale.The filter material is composed of permanent static charged fibers. Respirable dust smaller than 5 μm will be attracted by static electricity and adsorbed on the filter material when passing through this filter material. It really plays a role in blocking dust.


Second: The degree of closeness between the mask and face shape is better. When the mask is not close to the face, dust in the air will enter the respiratory tract through the gaps around the mask. Therefore, people should choose an anti-particle mask suitable for their face shape and wear an anti-particle mask properly.


Third: Wear comfortably, including small breathing resistance, light weight, hygienic wear and convenient maintenance, such as wearing arched anti-particle masks.



Hot Tags: FFP3 Mask, Manufacturers, Suppliers, Wholesale, Factory, Buy, China, Made in China, Price, Price List, Quotation, CE, FDA

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.
验证码,看不清楚?请点击刷新验证码